BRHRS - A-34 PART A
- MSDS: BRHRS
- Manufacturer: MORTON INTERNATIONAL
- Product Name: A-34 PART A
- National Stock Number: 8040-00N038948
Product Identification
Product ID:A-34 PART A
MSDS Date:08/08/1991
FSC:8040
NIIN:00N038948
Kit Part:Y
MSDS Number: BRHRS
Responsible Party
CHICAGO, IL 60606-1596
US
Emergency Phone: 312-807-2000;800-424-9300(CHEMTREC)
Info Phone: 312-807-2000;312-807-3422
Preparer: DAVID B. WIENCKOWSKI
Cage: 0TJX3
Contractor
Telephone: 312-807-2000
Cage: 0TJX3
Ingredients
TO CNTCT APPROP GOV ENVIRON AGENCIES IF
RTECS: 9999999ZZ
IS REC THAT AN ALTERNATIVE BE SELECTED ACCORDING TO
RTECS: 9999999ZZ
INCINERATE AT
RTECS: 9999999ZZ
TO EYES. PRLNGD CNTCT W/SKIN MAY CAUSE DRYNESS.
RTECS: 9999999ZZ
TO THE DEVELOPMENT OF PNEUMOCONIOSIS (DEPOSITION OF
RTECS: 9999999ZZ
MOD IRRIT TO EYE/SKIN. MAY CAUSE SKIN
RTECS: 9999999ZZ
BE MUTAGENIC IN SOME MICROBIAL ASSAYS BUT HAS FAILED
RTECS: 9999999ZZ
ABERRATIONS HAVE BEEN OBSERVED IN CULTURED RAT LIVER
RTECS: 9999999ZZ
DEVELOPMENT OF RESPIRATORY DISORDERS (I.D.
RTECS: 9999999ZZ
INHALATION CAN LEAD TO THE DEVELOPMENT OF
RTECS: 9999999ZZ
2 GLASSES OF WATER OR BY STICKING FINGER
RTECS: 9999999ZZ
IS DROWSY, UNCONSCIOUS, OR HAS NO GAG REFLEX. NOTE
RTECS: 9999999ZZ
ABSORPTION, ADMINISTERING TO THE SYMPTOMS AS THEY
RTECS: 9999999ZZ
OR THE MFR. HIGH AIRBORNE CONC MAY NECESSITATE
RTECS: 9999999ZZ
PROT PROGRAMS MUST BE IN COMPLIANCE WITH 29 CFR
RTECS: 9999999ZZ
EVAC EMPLOYEES & VENT AREA. NIOSH/MSHA APPRVD
RTECS: 9999999ZZ
ENCLOSED SPACES, OR IN AREAS WITH INADEQUATE
RTECS: 9999999ZZ
EPICHLOROHYDRIN BIS-PHENOL A; (BISPHENOL A/EPICHLOROHYDRIN
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 30-60%
OSHA PEL N/K
ACGIH TLV: N/K
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS;(TALC/HYDROUS
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 10-30%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST
TITANIUM OXIDE;(TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 5-10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
FIBROUS GLASS; (GLASS FIBERS).
CAS: 65997-17-3
Fraction By Weight: 5-10%
OSHA PEL N/K
ACGIH TLV: N/K
SILICON DIOXIDE, AMORPHOUS; (SILICA, AMORPHOUS/SILICON
CAS: 7631-86-9
Fraction By Weight: 1-5%
OSHA PEL N/K
ACGIH TLV: N/K
AN OCCUP ENVIRON. IT IS THEREFORE EXPECTED
RTECS: 9999999ZZ
IRRITATING TO EYES/SKIN BY MECHANICAL
RTECS: 9999999ZZ
PARTICLES MAY RSLT IN MILD, TRANSIENT IRRIT OF UPPER
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MECH IRRIT. SKIN:MILD TO MODERATE
IRRIT. CNTCT CAN CAUSE HYPERSENSITIVITY (I.E., ALLERGIC) RXNS IN
SUSCEPTIBLE INDIV. INHAL:UNDER NORMAL CNDTNS OF USE, NO ADVERSE
EFTS EXPECTED. INGEST:CAN CAUSE M ILD TO MOD IRRIT OF MOUTH, THROAT
& ESOPHAGUS. ADDL EFTS:DEPENDING ON ROUTE, FREQUENCY & DURATION OF
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:EXPOS, TOX MAY AFFECT EYE, SKIN,
IMMUNE SYS (E.G. ALLERGIC RXNS). OTHER TOX STUDIES:ING 3:A 2-YEAR
INHAL STUDY INVOLVING RATS SHOWED A SIGNIF INCR IN BENIGN &
MALIGNANT TUMORS @ 250 MG/M3 RES P LEVEL. (LOWER LEVELS DID NOT
SHOW THESE EFTS). THIS LEVEL IS 50 TIMES GREATER THAN EXPOS LEVEL
PERMITTED IN (ING 6)
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH THE MEDICAL
CONDITIONS INVOLVING THE FOLLOWING ORGANS AND/OR SYSTEMS SHOULD
TAKE APPROPRIATE PRECAUTIONS WHEN HANDLING PRODUCT:SKIN, IMMUNE
SYSTEM AND/OR SPECIFIC CHEMICAL ALLERGIES.
First Aid
First Aid:EYE:FLUSH W/WATER FOR AT LEAST 15 MINS. IF IRRIT DEVELOPS
CALL MD. SKIN:REMOVE CONTAM CLTHG & SHOES. WASH AFFECTED AREA
W/SOAP & WATER. IF IRRIT DEVELOPS, CALL MD. WASH CONTAM CLTHG
BEFORE REUSE. INHA L:MOVE TO FRESH AIR. IF SYMPS DEVELOP, GET MD.
IF NOT BRTHG GIVE ARTF RESP, PREF MOUTH TO MOUTH. INGEST:GET MD.
UNLESS ADVISED OTHERWISE, INDUCE VOMIT BY GIVING SYRUP OF IPECAC
FOLLOWED BY (ING 16)
Fire Fighting
Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:SMALL FIRES:USE WATER (SPRAY, FOG, OR IN SOME
INSTANCES, STREAM), FOAM, DRY CHEM OR CARBON DIOXIDE. LRG
FIRES:(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:SHOVEL OR VACUUM SPILLED PROD & PLACE IN CLSD
CNTNRS FOR FURTHER HANDLING AND DISPOSAL. DO NOT FLUSH TO SEWER,
STREAM, OR OTHER BODIES OF WATER. IF AIRBORNE CONC EXCEEDS
ESTABLISHED EXPOS LIMITS (TLV/ PEL), OR IF HIGH AIRBORNE CONC CAN
OCCUR, (ING 21)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY, WELL VENTILATED
AREA. FOLLOW GOOD MANUFACTURING AND HANDLING PRACTICES.
Other Precautions:CNTNR CAN BE HAZ WHEN EMPTY, BECAUSE IT CAN RETAIN
PROD RESIDUES. THEREFORE, DO NOT REUSE CNTNR FOR FOOD, CLTHG, OR
PRODS FOR HUMAN OR ANIMAL CONSUMPTION OR WHERE SKIN CNTCT MAY
OCCUR.
Exposure Controls
Respiratory Protection:ALL RESPS MUST BE NIOSH/MSHA APPRVD. WHERE
ESTABLISHED AIRBORNE EXPOS LIMITS ARE SURPASSED, WEAR APPROVED
EQUIPMENT. DETERMINE APPROP TYPE EQUIP FOR SPECIFIC APPLIC BY
CONSULTING RESP MFR. OBSERVE RES P USE LIMITS SPECIFIED BY NIOSH
(ING 19)
Ventilation:MIN EXPOS WITH ADEQ VENT.GEN (DILUTION) VENT MAY BE
ACCEPTABLE, BUT LOC EXHST REC WHEN VAPS/MISTS/DUST CAN BE RELEASED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMIAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH FACILITY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA:USE WATER (SPRAY OR STREAM) OR STANDARD FOAM. HAZ DECOMP
PRODS:FUMES (E.G., CARBON DIOXIDE & CARBON MONOXIDE), METAL OXIDES.
SPILL PROC:EVAC EMPLOYEES & VENTILATE AREA. A NIOSH/MSHA APPRO VED
SCBA OR SUPPLIED AIR RESPIRATOR SHOULD BE USED FOR ENTRY INTO
ENCLOSED SPACES, OR IN AREAS W/INADEQUATE VENTILATION.
Chemical Properties
Vapor Density:>1
Spec Gravity:1.42 (WATER=1)
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Stability
Stability Indicator/Materials to Avoid:YES
AMINES, MERCAPTANS, OXIDIZING AGENTS, ACIDS, STRONG BASES, AMMONIA.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IF HEATED TO HIGH TEMPERATURES, THIS
PRODUCT MAY EMIT THE FOLLOWING COMPOUNDS:PHENOLICS, SMOKE, SOOT, &
TOX (SUPP DATA)
Disposal
Waste Disposal Methods:IF DISCARDED IN ORIGINAL UNUSED FORM, PROD DOES
NOT MEET DEFINITION OF RCRA HAZ WASTE UNDER 40 CFR 261.
NEVERTHELESS, IT SHOULD BE MANAGED (STORED/TREATED/DISPOSED/ETC) AT
AN AUTH FACILITY, I/A/W ALL APPLIC FED, STATE & LOC REQS. BE SURE
(ING 23)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.